Canon HF20, HF200 Protecting Photos, Protecting Single Photos, Protecting Photos from the Index Screen, ( 34), Options, Protect], Repeat steps, 104 Š Photos, Pre-selecting

• Photos will be recorded on the memory selected for recording photos ( 42).

•[ Photo Sequence]:

-Up to 100 photos can be captured at a time.

-The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene).

-Photos will be captured at intervals of 1/30 second (1/24 second, if the scene was recorded at a frame rate of [ PF24]).

Protecting Photos

You can protect photos from accidental erasure.

( 34)

Protecting Single Photos

1 In single photo view, open the photo selection screen.

	FUNC.	[	Protect]
[	Protect] appears on the screen.

2 Select ( ) the photo you want to protect.

3Press to protect the photo.

appears on the bottom bar and the photo cannot be deleted. Press

again to remove the protection.

4Repeat steps 2-3 to protect additional photos or press FUNC. twice to close the menu.

Protecting Photos from the Index Screen

Options

[Individual Photos] Opens the same screen described in Protecting Single Photos ( 104). Continue from step 3 of that procedure to protect the photo.

[Selected Photos] Protects all the photos selected in advance (marked with a checkmark). Refer to Pre-selecting Recordings from the Index Screen ( 57).

[Remove All] Removes the protection from all photos.

104 Š Photos