This scene was recorded using another device and cannot be added to the playlist. - Scenes that were not recorded with this camcorder cannot be added to the playlist.
This scene was recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
Too many photos. Disconnect the USB cable.
-Disconnect the USB cable. Try using a memory card reader or decrease the number of photos on the memory card to fewer than 2,500 photos.
-If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection after a short while.
Transfer order error
-You attempted to set more than 998 transfer orders. Reduce the number of photos marked with transfer orders.
Unable to recognize the data
-You transferred data to the camcorder recorded in a different television system (PAL or SECAM).
Unable to recover data
- Could not recover a corrupted file.
Messages Related to the Optional DW-100 DVD Burner
If an error message appears while the camcorder is connected to the optional
Cannot read the disc. heck the disc.
-During disc recording mode, this message can appear when a commercially available DVD disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted.
-During disc playback mode, this message can appear when a commercially available DVD disc or a brand new DVD disc is inserted.
Close the memory card slot cover
-The memory card slot cover is open. Close the cover after correctly inserting the memory card ( 
42).
Connect the compact power adapter
-The camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.
Disc access failure. Check the disc.
-There was an error when reading the disc or attempting to write onto it.
-This message can appear also if condensation has formed ( 
167). Wait until the DVD burner dries completely before resuming use.
-The disc may not be loaded correctly. Try removing the disc and reinserting it.