Canon HF20, HF200 Accessories, NOTES, 30 Š Preparations, Fasten the grip belt, To remove the grip belt, •If the wireless controller does not work, check that [Wireless

NOTES

•The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

•If the wireless controller does not work, check that [Wireless

Remote Control] is not set to [ Off ] ( 143). Otherwise, replace the battery.

Accessories

Fasten the grip belt.

Adjust the grip belt so that you can reach the zoom lever with your index finger, and the START/STOP button with your thumb.

To remove the grip belt

1Lift the padded handgrip's flap and detach the strap from the Velcro pad.

2Pull the strap to remove it first from the front bracket on the camcorder, then to unthread it from the handgrip and finally to remove it from the rear bracket on the camcorder.

30 Š Preparations