Canon HF M30, HF M300, HF M31, HF M32 6 Press Zand touch [Yes], [Original] or [Video Snapshot], Check that you have selected the ftab, Touch [a] to open the scene selection screen

Using the software

See ‘ImageMixer 3 SE Software Guide’ (PDF file). Operating modes:

Converting Scenes into Standard Definition

1 Power the camcorder using the compact power adapter.

2Make sure there is a memory card in the camcorder with sufficient available space.

3Open the [Original], [Playlist] or [Video Snapshot] → [Original]/ [Playlist] index screen.

•Check that you have selected the ftab (built-in memory).

•[Original] or [Video Snapshot] → [Original] index screen: To convert all the scenes recorded on a specific date, narrow down the scenes shown to scenes recorded on that date (055).

4Touch [a] to open the scene selection screen.

When you convert scenes from the [Playlist] index screen (including the playlist of video snapshot scenes), you cannot select individual scenes; instead, the entire playlist will be converted. Skip directly to step 6.

5Touch on the individual scenes you want to convert.

•A checkmark O will appear on scenes selected. Touch a selected scene again to remove the checkmark.

•To select all the scenes at once: Touch [Select All] instead of touching individual scenes. (Remove in advance any checkmarks from scenes you may have selected individually.)

6 Press Zand touch [Yes].

• If a copyright notice appears, read it carefully and touch [OK] if you agree.

• Before touching [Yes], you can touch [5] to change the conversion settings as described below.

• Touch [B] to interrupt the operation while it is in progress.

142 Š External Connections