Canon HF M30, HF M300, HF M31, HF M32 Cinema Mode: Giving a Cinematic Look to your Recordings, See, Operating modes:, When a commercially available, When making recordings underwater with the

recordings while on land, we recommend using the [sSurface] recording program.

-To switch the recording program between [rUnderwater] and

[sSurface] while the camcorder is in the waterproof case, turn on the camcorder while holding jpressed down.

-p will appear on the screen when the camcorder's temperature becomes too high. If this happens, turn off the camcorder, take it out of the waterproof case and keep it in a cool place until the temperature goes down. If the camcorder becomes too hot, it will turn off automatically.

-When making recordings underwater with the [rUnderwater] recording program, the image on the LCD screen will appear redder than the actual subject. This will not affect the recording.

-When a commercially available wide-converter or other accessory is attached to the waterproof case, the camcorder may focus on the accessory. In such case, move the zoom lever toward Pto focus on the subject.

-See Specifications (0202) for additional notes about the [rUnderwater] and [sSurface] recording programs.

*Underwater is a unique environment that is ever-changing, depending on factors such as the weather and water conditions. In addition, water absorbs red light, which causes objects to appear bluer and greener.

Cinema Mode: Giving a Cinematic Look to your Recordings

Give your recordings a cinematic look by using the [DCine Mode] recording program. Combine this recording program with the 24 fps progressive frame rate [EPF24] to get the enhanced effect of the 24p Cinema Mode.

Operating modes:

To set the [DCine Mode] recording program

[FUNC.] 8[Rec. Programs] 8[DCine Mode] 8[a]

Video Š 63