File error

-You attempted to print a photo that was recorded with another camcorder, has a different compression, or was edited on a computer.

Hardware error

-Cancel printing. Turn off the printer and turn it back on.

-Check the printer status.

-Ink tank errors have occurred. Replace the ink tank.

Incompatible paper size

- The paper settings of the camcorder conflict with the printer’s settings.

Ink absorber full

-Select [Continue] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber.

Ink error

- An empty ink cartridge is installed. Replace the ink cartridge.

Low ink level

- The ink cartridge needs to be replaced soon. Select [Continue] to restart printing.

No ink

- The ink cartridge is not inserted or is out of ink.

No paper

- Paper is not correctly inserted or there is no paper.

No

print orders have been set

-

No photos have been marked with a print order.

Paper error

-There is a problem with the paper. The paper is not correctly loaded or the paper size is wrong.

-If the paper output tray is closed, open it to print.

Paper jam

-The paper jammed during printing. Select [Stop] to cancel printing. After removing the paper, set some paper again and retry printing.

Paper lever error

- Paper lever error occurred. Adjust the paper selection lever to the proper position.

X photos could not be printed

-You attempted to use the print order settings to print X photos that were recorded with another camcorder, have a different compression, or were edited on a computer.

Print head not installed

- No print head is installed in the printer or the print head is defective.

Additional Information Š 165