NOTES

When the audio level meter reaches the red point (0 dB mark), the sound may be distorted.

If the audio level is too high and the sound gets distorted, activate the microphone attenuator ( 143).

We recommend using headphones ( 81) to check the sound level while adjusting the audio recording level or when the microphone atten- uator is activated.

This function can also be assigned to the custom key/dial ( 85). In that case, the audio level adjustment bar appears in white.

Using Headphones

Use headphones for playback or to check the audio level while record- ing. The headphones are connected to the AV OUT/ terminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedure below to change the function of the terminal from AV output to (headphones) output.

* ( 33)

*Headphones can be used also in mode but the function of the terminal can- not be changed in that mode.

FUNC. [ Menu] [AV/Headphones]

[Headphones] FUNC.

appears.

Video Š 81