Troubleshooting
Memory card is full
-The memory card is full. Delete some recordings (090, 122) to free some space or replace the memory card.
Memory card is
-The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch.
Need to recover files from the memory card. Change the position of the LOCK switch on the | 161 |
memory card. |
-This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch.
No memory card
- Insert a compatible memory card into the camcorder (032).
No photos
- There are no photos to play back.
No scenes
- There are no scenes in the memory selected.
Not enough available space
-Delete some recordings on the memory card (090, 122) or select the [3 Mbps] bit rate for the conversion to SD.
Number of scenes already at maximum
-The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes (090) to free some space.
Number of stories already at maximum
-The gallery already contains the maximum number of stories (98
Scene recorded using another device. Cannot divide the scene.
- Scenes that were not recorded with this camcorder cannot be divided with this camcorder. Scene recorded using another device. Cannot play back the scene.
- Scenes that were not recorded with this camcorder cannot be played back.
Select the desired scene number
-A number of scenes have the same recording date but different file control information. This can occur for example when you edit photos and write the files back to the camcorder. Select a number to display the corresponding group of scenes.
Some scenes could not be converted
-Some scenes selected for conversion to SD were recorded using another device. These scenes were not converted.
Some scenes could not be deleted
- Movies that were protected/edited with other devices cannot be deleted with this camcorder.
Some scenes were recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied to memory card Y.
Task in progress. Do not disconnect the power source.
-The camcorder is updating the memory. Wait until the operation ends and do not disconnect the compact power adapter or remove the battery pack.