172 Additional Information
Mem. Card Unable to recognize the data
- The memory card contains scenes recorded using a video configuration that is not supported
(NTSC). Play back the reco rdings in the me mory card with the device orig inally used to r ecord
them.
Memory card cover is open
- After inserting a memory card, close the double memory card slot cover.
Memory card is full
- The memory card is full. Delete some recordings (057, 119) to free some space or replace
the memory card.
Memory card is write-protected
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-
tion of the LOCK switch.
Need to recover files from the memory card. Change the position of the LOCK switch on the
memory card.
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing on the memory card and later the posi-
tion of the card's LOCK switch was changed to prevent erasure. Change the position of the
LOCK switch.
No memory card
- Insert a compatible memory card into the camcorder (037).
No photos
- There are no photos to play back. Have fun taking some photos (042).
No scenes
- There are no scenes in the memory selected. Have fun shooting some video (042).
Not enough available space
- Delete some recordings on the memory card (057, 119) or select the [3 Mbps] bit rate for
the conversion to SD.
Number of scenes already at maximum
- The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes
(057) to free some space.
Number of stories already at maximum
- The gallery already contains the maximum number of stories (98 stories in any one given
memory). Delete some stories (059) or change the recording memory for movies (038).
Recording program: Underwater / Surface
Turn on the camcorder while holding the zoom lever toward T or W to change the recording
program rXs.
- Follow the instructions to switch the recording program between [Underwater] and [Surface]
while the camcorder is secured inside the optional WP-V3 Waterproof Case.