Video
This chapter covers functions related to shooting movies, including recording, playback, menu options, and hard disk operations.
Recording
Shooting Video
Before You Begin Recording
Make a test recording first to check if the camcorder operates correctly. If necessary, initialize the hard disk
( 61).
( 21)
1Move the / switch to (Movies).
2Turn the switch to ON to set the camcorder in CAMERA mode.
The red CAMERA indicator will turn on.
3 Press START/STOP to begin recording.
• The recording starts; press START/STOP again to pause the recording.
•You can also press START/STOP on the LCD panel.
WHEN YOU HAVE FINISHED RECORDING
1Make sure that the HDD access indicator is off.
2Turn off the camcorder.
3 Close the LCD panel.
IMPORTANT
•When recording movies, try to get a calm, stable picture.
Excessive camcorder movement while shooting and extensive use of fast zooms and panning can result in jittery scenes. In extreme cases, the playback of such scenes may result in visually induced motion sickness. If you experience such a reaction, immediately stop the playback and take a rest break as necessary.
•Observe the following precautions while the HDD access indicator is on or flashing. Failing to do so may result in permanent data loss or hard disk damage.
-Do not subject the camcorder to vibrations or strong impacts.
-Do not disconnect the power source or turn off the camcorder.
-Do not change the operating mode.
29