Video

TO ADJUST THE VOLUME OF THEHEADPHONES

In mode, adjust the volume of the headphones with the [PHONES

VOL.] setting ( 47). In

mode, use the navigation buttons and the function guide following the same procedure as when adjusting the speaker’s volume.

( 21)

FUNC.

( 23)

1 Press FUNC. .

2Use the navigation buttons to

select the icon and press to open the setup menus.

3Press or to select [SYSTEM

SETUP] and press .

4Press or to select

[AV/PHONES] and press .5Press to select [ PHONES]

and press .

6 Press FUNC. .

appears.

IMPORTANT

Do not connect the headphones to the

AV OUT/ terminal if the icon does not appear on the screen. If you connect the headphones while the terminal is set to AV output, only noise will be output.

When using headphones, make sure to lower the volume to an appropriate level.

The sound of the built-in speaker will be muted when you close the LCD panel,

when you connect the STV-250N Stereo Video Cable to the AV OUT/ terminal or when [AV/PHONES] is set to

[ PHONES].

NOTES

Use commercially available headphones with a 3.5 mm minijack and a cable no longer than 3 m.

When you turn off the camcorder or change the operating mode, the

[AV/PHONES] setting in mode

will return to [ AV].

The volume of the headphones cannot be adjusted while recording.

36