Canon HG10 Self Timer, FUNC, NOTES, POINTS TO CHECK, 2Press to select [FOCUS], In record pause mode, press, If the function guide does not

Self Timer Manual Focus Adjustment

( 21)

FUNC.

( 23)

FUNC. MENU

CAMERA SETUP

SELF TIMER

FUNC. ON

appears.

:

In record pause mode, press

START/STOP .

The camcorder starts recording after a 10-second countdown*. The countdown appears on the screen.

:

Press PHOTO , first halfway to activate the autofocus and then fully.

The camcorder will record the still image after a 10-second countdown*. The countdown appears on the screen.

*2 seconds when using the wireless controller.

NOTES

Once the countdown has begun, you can press START/STOP (when recording movies), press PHOTO fully (when recording still images) or turn off the camcorder to cancel the self timer.

Autofocus may not work well on the following subjects. In such case, focus manually.

•Reflective surfaces

•Subjects with low contrast or without vertical lines

•Fast moving subjects

•Through wet windows

•Night scenes

POINTS TO CHECK

( 21)

Adjust the zoom before you start the procedure.

Mode switch: P

1If the function guide does not

appear on screen, press to display it.

2Press to select [FOCUS].

•If [FOCUS] does not appear on the function guide, repeatedly press to display it.

•“MF” appears.

3Press or once to verify if the image is focused.

The center of the screen will be magnified to help you focus more easily. You can also turn off the focus

assist function ( 43).

53