Check the memory card

- Cannot access the memory card. Check the memory card and make sure it is inserted cor- rectly.

- A memory card error occurred. The camcorder cannot record or display the image. Try removing and reinserting the memory card, or use a different memory card.

-You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card (A37).

-If after the message disappears, *appears in red, perform the following: Turn off the cam-

corder and remove and reinsert the memory card. If *turns back to green you can resume recording/playback. If the problem persists, save your recordings (A146) and initialize the memory card (A41).

Do not disconnect the power source. Cannot write data with this connection. To write data to the camcorder, connect the compact power adapter then reconnect the camcorder and computer. Do not disconnect the USB cable unless you first use the computer to safely end the connection.

-The camcorder cannot be operated while it is not being powered by the compact power adapter and is connected to a computer with the supplied USB cable. In addition, scenes can- not be written back and music files cannot be transferred to the camcorder. To avoid corrupt- ing the data in the camcorder’s memory, use the computer’s Safely Remove Hardware function to end the connection and disconnect the USB cable before using the camcorder.

-To be able to write back scenes and to transfer music files to the camcorder, use the com- puter’s Safely Remove Hardware function to end the connection, disconnect the USB cable, power the camcorder using the compact power adapter and only then connect it to the com- puter again.

Do not disconnect the power source. Do not disconnect the USB cable unless you first use the computer to safely end the connection.

-When the camcorder is in mode and is connected to the computer with the supplied USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of the recordings in the camcorder. Use the computer's Safely Remove Hardware function to end the connection and disconnect the USB cable before using the camcorder.

-To be able to write back scenes and to transfer music files to the camcorder, power the cam- corder using the compact power adapter and only then connect it to the computer using the supplied USB cable.

File name error

- The folder and file numbers have reached their maximum value. Set r>[File Number- ing] to [Reset] and delete all the MP4 movies (A61) and photos (A134) on the memory card or initialize it (A41).

Initialize only using the camcorder

-There is a problem with the file system that prevents accessing the selected memory. Initialize the memory with this camcorder (A41).

214 Š Additional Information