A T O N | AH66T INSTALLATION MANUAL |
|
|
Tune Command
Description: Tunes to the selected frequency in the current band. Status can be queried
Prefix | TS | Parameter 1 |
| Parameter 2 |
|
|
|
|
|
|
|
&AH66 | R1/R2 | TUNE |
|
| |
|
|
|
|
|
|
Examples: |
|
|
|
|
|
&AH66,R1,TUNE,10350<cr> | TUNES (TUNE) CHASSIS ONE’S (R1) radio to frequency | ||||
|
| 103.50 (10350).* |
|
| |
&AH66,R2,TUNE,UP<cr> | TUNES (TUNE) CHASSIS TWO’S (R2) radio UP (UP) by | ||||
|
| one step. (103.50 to 103.60, for example.) | |||
&AH66,R2,TUNE,DOWN<cr> | TUNES (TUNE) CHASSIS TWO’S (R2) radio DOWN | ||||
|
| (DOWN) by one step. (94.60 to 94.50, for example.) | |||
&AH66,R1,TUNE,?<cr> | QUERIES (?) CHASSIS ONE’S (R1) radio frequency | ||||
|
| (TUNE) setting. |
|
| |
Example query responses: *AH66,R1,TUNE,9450, *AH66,R1,TUNE,10250, *AH66,R1,TUNE,630, etc.
*This command REQUIRES both digits to the right of the decimal point. You MUST enter the zero (0) for the command to function.
© ATON 2010 All rights reserved. | Page 82 |
