A T O N | AH66T INSTALLATION MANUAL |
|
|
Primary Commands
Bass Level Control
Description: Adjusts Bass level in a zone. Status can be queried.
Prefix | Command | Parameter 1 | Parameter 2 | Parameter 3* |
| |
|
|
| Zone # |
| +/- dBs |
|
&AH66 | BAS |
| ||||
|
|
|
|
|
|
|
Examples: |
|
|
|
|
|
|
&AH66,BAS,6,+<cr> | INCREASES (+) the BASS (BAS)in ZONE SIX (6) by 1 dB.* | |||||
DECREASES | ||||||
&AH66,BAS,10,0<cr> | Sets the BASS (BAS) in ZONE TEN (10) to FLAT (0).* | |||||
&AH66,BAS,2,+,6<cr> | Sets the BASS (BAS) in ZONE TWO (2) to PLUS (+) SIX dB (6). | |||||
Sets the BASS (BAS) in ZONE THREE (3) to MINUS | ||||||
|
| dB (2). |
|
|
| |
&AH66,BAS,5,?<cr> | QUERIES (?) the BASS (BAS) setting of ZONE FIVE (5).* | |||||
Example QUERY responses are:*AH66,BAS,5,0 (ZONE | ||||||
|
|
| *AH66,BAS,2,+,3 (ZONE | |||
|
|
|
*When increasing or decreasing the BASS setting by 1 dB, setting BASS to 0 (flat), or querying settings, Parameter 3 is not used.
DND (Do Not Disturb) Control
Description: Enables, Disables or TOGGLES the DND setting in a zone. Status can be queried.
| Prefix | Command | Parameter 1 | Parameter 2 |
| |
|
|
|
| Zone # | DND State |
|
| &AH66 | DND | 0/1/2/? |
| ||
|
|
|
|
|
|
|
Examples: |
|
|
|
|
| |
&AH66,DND,6,0<cr> | Sets the | |||||
&AH66,DND,9,1<cr> | Sets the | |||||
|
|
| ON. |
|
|
|
&AH66,DND,10,2<cr> | TOGGLES (2) the | |||||
&AH66,DND,2,?<cr> | QUERIES the | |||||
Possible QUERY responses are:*AH66,DND,2,0, or*AH66,DND,2,1 where 0=OFF and | ||||||
|
|
|
| 1=ON. |
|
|
|
|
|
|
|
|
|
© ATON 2010 All rights reserved. |
|
|
|
| Page 56 |