ATON AH66T-KT installation manual System Power Control, Prefix, Examples, Treble Level Control

A T O N AH66T INSTALLATION MANUAL

System Power Control

Description: Turns the system OFF. Status can be queried.

Prefix	Command		Parameter 1
&AH66	SYSOFF		?
Examples:
&AH66,SYSOFF<cr>		Turns all zones OFF (SYSOFF).
&AH66,SYSOFF,?<cr>		QUERIES (?) the POWER STATUS of the SYSTEM (SYSOFF).

Possible QUERY responses are:*AH66,SYSOFF,0 or *AH66,SYSOFF,1, where 0=OFF and 1=ON.

Treble Level Control

Description: Adjusts Treble level in a zone. Status can be queried.

Prefix	Command		Parameter 1	Parameter 2	Parameter 3*
			Zone #		+/- dBs
&AH66	TRE		1-12	+/-/0/?	1-12
Examples:
&AH66,TRE,6,+<cr>		INCREASES (+) the TREBLE (TRE)in ZONE SIX (6) by 1 dB.*
&AH66,TRE,9,-<cr>		DECREASES (-) the TREBLE (TRE) in ZONE NINE (9) by 1 dB.*
&AH66,TRE,10,0<cr>		Sets the TREBLE (TRE) in ZONE TEN (10) to FLAT (0).*
&AH66,TRE,2,+,6<cr>		Sets the TREBLE (TRE) in ZONE TWO (2) to PLUS (+) SIX dB (6).
&AH66,TRE,3,-,2<cr>		Sets the TREBLE (TRE) in ZONE THREE (3) to MINUS (-)
		TWO dB (2).
&AH66,TRE,5,?<cr>		QUERIES (?) the TREBLE (TRE) setting of ZONE FIVE (5).*

Example QUERY responses are:*AH66,TRE,5,0 (ZONE FIVE-TREBLE is FLAT), *AH66,TRE,2,+,3 (ZONE FIVE-TREBLE is PLUS 3), *AH66,TRE,5,-,4 (ZONE FIVE-TREBLE is MINUS 4).

*When increasing or decreasing the TREBLE setting by 1 dB, setting TREBLE to 0 (flat), or querying settings, Parameter 3 is not used.

© ATON 2010 All rights reserved. Page 63