A T O N | AH66T INSTALLATION MANUAL |
|
|
RadioRA® 2 Integration
In the ATON configuration software determine which Comm Port you will be using to connect to the lighting system. Connect all RadioRA2 components according to the RadioRA2 installation manual. Verify functionality of the RadioRA2.
Connect a Cat5 (TIA/EIA568A or B) from the selected Comm Port of the AH66T to the
RadioRA2 MAIN Repeater.
The MAXIMUM total wire run length from the AH66T’s Comm Port to the
Figure 4-4: RadioRA 2 Connections
RadioRA feedback is only displayed on the OLED2s. It does not “pass through” to 3rd party controllers.
© ATON 2010 All rights reserved. | Page 37 |