ATON AH66T-KT Zone IR Input Connections, Source IR Output Connections, 3:Zone IR Inputs

A T O N AH66T INSTALLATION MANUAL

Zone IR Input Connections

Each zone has a 3.5mm mono IR Input connector that allows IR commands from 3rd party controllers to be used without the need to splice into the Touchpad Input connections.

Simply connect a 3.5 mono cable from the IR output port of the 3rd party controller to the

Zone IR input jack for the zone you wish to control.

Figure 3-3: Zone IR Inputs

Source IR Output Connections

The AH66T features 6 source-specific IR emitter outputs. Each of these outputs is active only when the assigned source is selected. This makes it possible to use identical source components and still have the capability of separate control. For sources such as a multi- output music server, the ATON configuration software can route IR for either output to the same IR port, eliminating the need to use IR “Y” cables.

Figure 3-4: Source IR Outputs

When connecting multiple AH66T chassis, it is only necessary to connect IR sources to chassis # 1. The IR LOOP PORTS provide a link between chassis to route IR from zones on the second chassis to the Source IR Outputs of the main chassis..

© ATON 2010 All rights reserved. Page 21