- 5 -
5. WINDOWS 98SE DRIVER INSTALLATION
Follow the procedure s below to install the Windows 98S E driver:
1. When Windows boots up, a dialog box New Hardware Fou nd wi l l
appear as:
Texas Instrument OHCI Compliant IEEE 1394 Host Controller
Or
OHCI Compliant IEEE 139 4 Host Controller
2. click "Next".
3. Choose " Select for t he best driv er for your dev ices", and c lick on
"Next".
4. Insert the Wi ndows 98SE CD-Tit le into your CD-ROM drive and
check the box label "CD-RO M" then click "Next".
5. Click "Finish" for the driver to take effect.
6. Driver installation complete. Pleas e proceed to Section 8 for
device connection procedur es.
6. WINDOWS ME DRIVER INSTALLATION
Follow procedures belo w t o in stall the Windows ME driver:
1. When Windows boots up, a dialog box New Hardware Fou nd wi l l
appear as:
Texas Instrument OHCI Compliant IEEE 1394 Host Controller
Or
OHCI Complian t IEEE 1394 Host Contr oller
2. click "Next".
3. Choose " Select for t he best driv er for your dev ices", and c lick on
"Next".
4. Insert the Windows ME CD-ROM and check th e "CD-ROM"
option then click on "Next" .