Marshall electronic V-R201-IMD-TE warranty Marker Setup Submenu, System Configuration Submenu

On-Screen Menu (continued)

MARKER SETUP SUBMENU

Use the Marker Setup submenu to select various types of markers and settings in 4:3, 16:9, or Full Screen modes.

Marker Setup Submenu

■16:9 Markers

Use this setting to superimpose one of 10 markers on the screen when in 16:9 or Full Screen mode. This setting is disabled when the aspect ratio is set to 4:3, or when Pixel-to-Pixel mode is enabled. Note that in Full Screen mode, markers are vertically “stretched” along with the picture to fit the 16:10 screen.

•Off (No Marker)

•95% Safe Area

•93% Safe Area

•90% Safe Area

•88% Safe Area

•80% Safe Area

•1.85:1 Aspect Ratio

•2.35:1 Aspect Ratio

•4:3 Aspect Ratio

•14:9 Aspect Ratio

•13:9 Aspect Ratio

16:9 Marker Examples:

OFF (No Marker) 90% Safe Area

2.35:1 Aspect Ratio 4:3 Aspect Ratio Marker

On-Screen Menu (continued)

SYSTEM CONFIGURATION SUBMENU

Use the System Configuration submenu to control various system parameters.

System Configuration Submenu

■Gray Levels

Use the Gray Levels menu option to view 32 levels of flat field gray. This feature is useful for color temperature comparison and calibration.

■User-Definable Function Buttons

Use the Function 1 and Function 2 menu items to define each function button on the front panel of the monitor. The following options are available for each button:

•	Marker	Enable and rotate amongst marker settings (choices depend on aspect ratio setting)
•	Center Marker	Enable/disable center marker
• Marker Backgrd		Rotate amongst marker backgrounds
•	IMD	Display/hide IMD text
•	Time Code	Display/hide time code
• OSD Tally		Rotate amongst types of OSD Tally
•	Audio Monitor	Display/hide audio presence indicator
•	Aspect Ratio	Toggle between 4:3 and 16:9 aspect ratios
•	Pixel to Pixel	Enable/disable Pixel-to-Pixel mode
• Ctemp/Gamma		Rotate amongst color temperature settings
• Blue Only		Enable/disable Blue Only mode
• Monochrome		Enable/disable Monochrome mode

■Saving and Loading User Presets

Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. Each Preset saves all monitor settings except for IMD configuration.

•Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded by selecting MFG. (Factory defaults cannot be overwritten.)

•Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.

■Software Version Display

The Main Board, Keypad, and CPLD software version numbers are displayed.

10 15