Canon Recycled Cartridge Installation & Trouble Shooting
PIXMA IP Series Printer
Including:
IP1600
Ink Compatibility
IP1700
Ink Compatibility
IP1800
Ink Compatibility
Install cartridge.
Message 1:
“The ink cartridge has been installed or replaced. If the print out contains misaligned lines or is not satisfactory after the installation or replacement, refer to the user’s guide and carry out the print head alignment.”
OK
Click OK to continue. Printer will start printing.
If second message appears and yellow light flashes: “The following may have run out of color. The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly detected. If you want to continue printing with out this function, press the printer’s resume button for at least 5 seconds. Canon recommends using new genuine Canon cartridges in order to obtain optimum quality. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continu- ation of printing under the ink out condition.”
Cancel Printing | About ink |
Do not click “cancel printing”. Press and hold down printer resume button until the yellow light disappears and the green light stays on. Printer will start printing. This action will bypass the ink level detection from the recycled cartridge. It will not damage the printer! With a recycled cartridge this action needs to be done one time.
A full recycled cartridge ink level may not display correctly. It may show empty.
If you want to check the ink level, you can do a “Nozzle check” by following the directions below:
Go to menu File select print click on “Property” click on “Maintenance”
Click on “Nozzle check” to print out the color check. Click on “Cartridge Alignment” to align the cartridge.
PIXMA MP series printer
Including:
MP150
Ink Compatibility
MP160
Ink Compatibility
MP170
Ink Compatibility
MP180
Ink Compatibility
Install cartridge.
Message 1:
“The ink cartridge has been installed or replaced. If the print out contains misaligned lines or is not satisfactory after the installation or replacement, refer to the user’s guide and carry out the print head alignment.”
OK
Click OK to continue.
If second message appears and yellow light flashes: “The following may have run out of color. The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly detected. If you want to continue printing with out this function, press the printer’s start button. Canon recommends using new genuine Canon cartridges in order to obtain optimum quality.”
Cancel Printing | About ink |
Do not click “cancel printing”. Press printer start button to start printing. This action will bypass the ink level detection from the recycled cartridge. It will not damage the printer! With a recycled cartridge this action needs to be done one time.
A full recycled cartridge ink level may not display correctly. It may show empty.
If you want to check the ink level, you can do a “Nozzle check” by follow the directions below:
Go to menu File select print click on “Property” click on “Maintenance”
Click on “Nozzle check” to print out the color check.
Click on “Cartridge Alignment” to align the cartridge.
For more information please visit http://www.usa.canon.com/home | 10/23/08 |
