4.Put glue at the same position of the CISS cartridge (at the
2 sides)
Step 3: Install Cartridges
5.Stick the chips on the CISS cartridge (Pls note that the color should be correct. Do Not misuse the chips).
6.Repeat this with other cartridges.
1.Fix the support arm on the printer. | 2. Put the cartridges in the printer carriage. |
Step 4: Fix the Tube
1.Fix the tube on the support arm with the tube clip.
2. The installation is finished.
Step 5: Adjust the Tube
1.Adjust the length of the tube, and move the printer carriage.
2.Leave enough length for the tube so that the carriage can reach the fastest place.
3.Make sure that the rube will not make trouble to the carriage moving during working.
