Troubleshooting
Problem
Possible Cause
Try This
|
|
|
| Printer not ready | If the POWER lamp is off, turn the printer on. | ||
|
|
|
| ||||
|
|
|
|
| If the POWER lamp is flashing green, the printer is initializing. Wait until the | ||
“Error No.: 300” |
| ||||||
| POWER lamp stops flashing. | ||||||
|
|
|
|
| |||
|
|
|
|
|
| ||
|
|
|
| Printer not properly | Ensure that the printer is securely connected to the computer. | ||
|
|
|
| connected | Note | If you are using a switching hub or other device, disconnect the | |
|
|
|
|
| |||
|
|
|
|
|
| printer and reconnect it directly to the computer and try printing | |
|
|
|
|
|
| again. | |
|
|
|
|
|
| If successful, the problem may have been with the device. | |
|
|
|
|
|
| There could also be a problem with the cable(s). Replace the | |
|
|
|
|
|
| cable(s) and try printing again. | |
|
|
|
|
|
| ||
|
|
|
| Your printer name is | 1. Select Applications from the Go menu. | ||
|
|
|
| not displayed in the | 2. | ||
|
|
|
| Printer List of | If you are using an OS other than Mac OS X v.10.3, | ||
|
|
|
| Printer Setup Utility | Center icon. | ||
|
|
|
| (or Print Center) | 3. Ensure that iP90 is displayed in the Printer List. | ||
|
|
|
|
| If iP90 is not displayed in the Printer List, reinstall the printer driver. | ||
|
|
|
|
| Note | If the problem persists, delete all unnecessary documents | |
|
|
|
|
|
| from the Extensions and Control Panels folder. | |
|
|
|
| Waste ink absorber | The printer has a | ||
|
|
|
| ||||
|
|
|
| almost full | head cleaning. Eight flashes indicates that this absorber is nearly full. | ||
“Error No.:1700” | |||||||
| Press the RESUME/CANCEL button to clear the error so you can continue | ||||||
|
|
|
|
| |||
|
|
|
|
| printing. Before the waste ink absorber becomes completely full, contact the | ||
|
|
|
|
| Customer Care Center. | ||
|
|
|
|
|
| ||
|
|
|
| A specified period | Disconnect the camera cable, press the RESUME/CANCEL button on the printer | ||
|
|
|
| ||||
|
|
|
| of time has elapsed | and reconnect the cable. | ||
“Error No.:2001” | |||||||
without receiving a | If the error is still unresolved, there is a possibility that you are using a digital | ||||||
|
|
|
| ||||
|
|
|
| response from the | camera or digital video camcorder that is not supported by this printer. Use a | ||
|
|
|
| digital camera/The | digital camera or digital video camcorder compatible with this printer. | ||
|
|
|
| digital camera or |
|
| |
|
|
|
| digital video |
|
| |
|
|
|
| camcorder |
|
| |
|
|
|
| connected is not |
|
| |
|
|
|
| compatible with |
|
| |
|
|
|
| this printer |
|
| |
|
|
|
|
|
|
| |
|
|
|
| If the ink tank has |
|
| |
|
|
|
|
|
| ||
|
|
|
| been replaced with |
|
| |
Have you replaced |
|
| |||||
a new one |
|
| |||||
an ink tank with a |
|
| |||||
|
|
| |||||
new one? message is |
|
|
| ||||
displayed |
| Click Yes to reset the ink counter. | |||||
|
|
|
|
|
See "Resetting the Ink Counter" on page 64.
If the ink tank has | Click No on the dialog box described above. | ||
been removed for a | You can choose the option to disable the diaplay of this confirmation message. | ||
certain period (the | 1. | Ensure that the printer is turned on and open the Printer Properties dialog | |
ink tank has not | |||
| box. | ||
been replaced) |
| ||
2. | Click the Maintenance tab and then click Low Ink Warning Setting. | ||
| |||
| 3. | Clear the check box of Display a confirmation message of ink tank | |
|
| replacement and click Send. |
79