$ Customizing the Self-Timer

You can set the time delay (0 – 30 seconds) and the number of shots taken (1 – 10 shots).

Select $.

●After pressing the p button, press the op buttons to select $, then immediately press the n button.

Select the settings.

●Press the opbuttons to select [Delay] or [Shots].

●Press the qr buttons to select a value, then press the m button.

●Follow Step 3 in “Ò Using the Self-Timer” (p. 63) to shoot.

What if the number of shots is set to two or more shots?

•Exposure and white balance settings are set with the first shot.

•When you set the time delay for more than 2 seconds, the self-timer lamp and sound speed up 2 seconds before the shutter releases (when the flash will fire, the lamp lights).

• If the flash fires, the shooting interval may be longer.

• If you set a high number of shots, the shooting interval may be longer.

•If the memory card becomes full, shooting stops automatically.

Shooting Using a TV Monitor

You can use a TV to display the camera screen content.

•Connect the camera to a TV as described in “Viewing Images on a TV” (p. 110).

•Shooting procedures are the same as when using the camera’s monitor.

TV display is not available when using the HDMI Cable HTC-100 (sold separately) to connect the camera to a high-definition TV.

76