Changing the Color and Shooting
• Using the flash may cause unexpected results in this mode.
• The recorded color will be saved even if you turn off the power.
Y Color Swap 
You can swap one color in an image for another when recording it. You can only swap one color.
Select Y.
●Set the mode switch to 4, the press the m button.
●Press the op buttons to select G.
●Press the qr buttons to select U (rightmost icon), then press the l button.
●ress the qr buttons to select Y, then press the m button.
Press the l button.
●The unchanged image and the Color Swap image will both display.
●The default setting is to change green to gray.
Specify the color to be swapped.
●Position the center frame so it is filled with
the color you want and press the qbutton. The specified color will be recorded.
90