To Program Group Dial | Canon L900 specs

C.TO PROGRAM GROUP DIAL

1.Open panel cover

2.Press DATA REGISTRATION

3. Press ∨ to display “2. TEL REGISTRATION”

4.Press SET

5. Press ∨ to display “3. GROUP DIAL”

6.Press SET

7.

Press ∨

(if necessary) until an empty space appears

8.Press SET twice

9.Close panel cover & press desired one-touch keys & / or the coded speed dial numbers

10.Press SET twice

11.Enter name for the above group dialer (refer to A.9. on III : TO

STORE FAX NUMBERS : ONE-TOUCH SPEED DIAL)

12.Press SET

13.To continue, press DATA REGISTRATION

14.Repeat steps No. 7 to No. 12

15.To end, press STOP

7

Image 8

Canon L900 manual To Program Group Dial, Store FAX Numbers ONE-TOUCH Speed Dial

Contents

Canon Contents XII Xiii Press Data Registration Code Numbers for Alphabets and SymbolsTo Register Sender Identification To Stop Sending Press Direct TXPress START/SCAN III ONE-TOUCH Speed Dial 01-KEYTO 72-KEY Data Registration TEL RegistrationSET Coded SPD Dial To Program Group Dial Store FAX Numbers ONE-TOUCH Speed Dial To Erase a Speed Dial Manual Dialing from the Numeric 10-KEY PAD Combination of a & B To Cancel a Delayed Transmission Delayed TransmissionPress Delayed Transmission VII When the FAX Displays Received in Memory Press SET to display Select Locations Viii RE-SENDINGPress Memory Reference To Print Document Memory List Speed Dial ListTo Print a List of Previous 40 Transactions Making Copies XI Confirmation Report Press Program XII Transmission Report Press Delete File Using The Memory Reference Button Press Memory ReferenceXiii Erasing a Document from the Memory