Connecting to the Computer and Uploading your Videos

If you are connecting the camcorder to the computer immediately after the conversion described in the previous section, start this procedure from step 3 below. Otherwise, start this procedure from the beginning.

1 Power the camcorder using the compact power adapter.

2Open the [For Web Upload] index screen on the memory card. [b] 8g 8[SD Scenes] 8[For Web (MPEG-2)]

3Connect the camcorder to the computer using the supplied USB cable.

Connection D. Refer to Connection Diagrams (0119).

If the device type selection screen appears, touch [Computer/ Printer].

On the computer, ImageMixer 3 SE will start up automatically and the startup screen (ImageMixer 3 Launcher) will appear.

4Click [Web upload] and continue the operation on the computer following the software's indications.

See also ‘ImageMixer 3 SE Software Guide’ (PDF file on the Transfer Utilities CD-ROM).

IMPORTANT

While the camcorder is connected to the computer, do not open the memory card slot cover and do not remove the memory card.

Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the USB cable.

-Do not disconnect the compact power adapter or turn off the camcorder or the computer.

External Connections Š 139