Task in progress. Do not disconnect the power source.

-The camcorder is updating the memory. Wait until the operation ends and do not disconnect the compact power adapter or remove the battery pack.

The camcorder is set to photo mode

-You pressed gwhile recording photos ( mode). Set the camcorder to

or mode to record movies.

The lens cover is not fully open. Turn the camcorder off, then on again.

-The lens cover did not open fully. Turn the camcorder off, then on again. If this does not solve the problem, consult a Canon Service Center.

This memory card contains scenes. Delete all scenes to use relay recording.

-Save your movies (0123) if necessary, and delete all the movies from the memory card (053).

This photo cannot be displayed

-You may not be able to display photos taken with other devices or image files created or edited on a computer and then transferred to a memory card connected to the computer.

This Bphoto could not be deleted

- Protected photos (B) cannot be deleted. Remove the protection (0110).

This scene was recorded using another device and cannot be added to the playlist.

-Scenes recorded using another device and then transferred to a memory card connected to a computer cannot be added to the playlist.

To record video on this memory card, it is recommended to use only the XP+/SP/LP recording modes

-Movies may not be recorded correctly on this memory card if the recording mode is set to MXP or FXP mode (056).

To use this function change the camcorder's mode from 5to y

-You pressed a button that cannot be used in mode. Set the mode switch to yto set the camcorder to flexible recording mode.

Too many photos. Disconnect the USB cable.

-Disconnect the USB cable. Try using a memory card reader or decrease the number of photos on the memory card to fewer than 2,500 photos (printers, Windows computers), or 1,000 photos (Macintosh computers).

-If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection after a short while.

bTotal play time is too long

- The playlist cannot be converted when its total playback time exceeds 2 hours and 30 min- utes. Reduce the number of scenes in the playlist.

176 Š Additional Information