PREPARATION

NAME OF EACH PART OF THE PROJECTOR

FRONT OF THE CABINET

PROJECTION LENS

ZOOM RING

FOCUS

RING

SPEAKER (Monaural)

LENS COVER

INFRARED

REMOTE RECEIVER

BACK OF THE CABINET

TERMINALS

AND CONNECTORS

AIR INTAKE VENTS (Both sides and Rear)

This projector is equipped with cooling fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction.

● Do not cover the vent slot.

● Keep sides and rear clear of any obstructions. Obstructions may block cooling air.

POWER CORD CONNECTOR

EXHAUST VENT

HOT AIR EXHAUSTED !

Air blown from the exhaust vent is hot. When using or installing the projector, the following precautions should be taken.

●Do not put a flammable object near this vent.

●Keep the side grills at least 3’ (1m) away

from any object, especially heat-sensitive object.

●Do not touch this area, especially screws and metallic parts. This area will become hot while the projector is used.

This projector detects the internal temperature and automatically controls the operating power of the Cooling Fans.

BOTTOM OF THE CABINET

LAMP COVER

AIR INTAKE VENTS

ADJUSTABLE FEET

AND

AND AIR FILTERS

FEET LOCK LATCHES

These Air Intake Vents

 

should not be blocked.

 

7