Using System Features Key Locations, Chapter | Agilent Technologies E4406A

Using System Features

Key Locations

Table 2-1	Key Access Locations

Key		Key Access Path

Slope		Mode Setup/Trigger/Ext Front

Slope		Mode Setup/Trigger/Ext Rear/

Slope		Mode Setup/Trigger/RF Burst/

Slope		Mode Setup/Trigger/Video/

Socket Port		System/Config I/O/ SCPI Lan

Span		Meas Setup/

SPAN/		Front Panel
X Scale

Spectrum		View/Trace/
		Note: This feature is used when measurement is set to spectrum.

Spectrum		Marker/Trace/
		Note: This feature is used when measurement is set to spectrum.

Spectrum Avg		Marker/Trace/
		Note: This feature is used when measurement is set to spectrum.

Spectrum		MODE/Service/
(Freq Domain)

Spectrum		MODE/Basic/
(Freq Domain)

Store Abs Ampl to		System/Alignments/Align Subsystem/ Align 50 MHz Reference/
EEROM

Subnet Mask		System/Config I/O

Sweep Time		Meas Setup/ Can be accessed when measure is set to waveform.

System		Front Panel

Telnet Port		System/Config I/O/ SCPI Lan

Timebase Freq		MODE/Service/

Trace		Marker/

Trace Display		View/Trace/

Trigger		Mode Setup/
		Note: This feature is used when measurement is set to either
		spectrum or waveform.

Trig Holdoff		Mode Setup/ Trigger/
		Note: This feature is used when measurement is set to either
		spectrum or waveform.

Chapter 2

Agilent Technologies E4406A manual Using System Features Key Locations, Chapter