Agilent Technologies E4406A manual Key Locations, Table, Key Access Locations

Using System Features

Key Locations

Key Locations

All system, service, and basic features can be located by using the key access table below. The key access path describes the key sequence you enter to access the particular key.

Some features can only be used when specific measurements are active. If a feature is not currently valid the key label for that feature will appear as lighter colored text, will be greyed-out, or will not be displayed at all.

Table 2-1	Key Access Locations
Key		Key Access Path
10 MHz Out		System/Reference/
50 MHz Amptd		MODE/Service/
50 MHz Ref		Input/Input Port/
ADC Dither		Meas Setup/More(1 of 2)/Advanced/ More(1 of 2)/
ADC Range		Meas Setup/More(1 of 2) / Advanced /
		Note: This feature is used when measure is set to either
		spectrum or waveform.
Adjust Now		System/Alignments/Align Subsystem/Align 50 MHz Reference/
		Note: Requires Password
Advanced		Meas Setup/More(1 of 2)
Align 50 MHz		System/Alignments/Align Subsystem/
Reference		Note: Requires Password
Align ADC		System/Alignments/Align Subsystem/
Align All Now		System/Alignments/
Align IF		System/Alignments/Align Subsystem/
Align RF		System/Alignments/Align Subsystem/
Alignments		System/
Align Subsystems		System/Alignments/
All		View/Trace/Trace Display/
Alpha Editor		The Alpha Editor is accessed by following the Menu Access
		Paths that accompany the following key entries: Choose Option,
		License Key, and Host Name.
AMPLITUDE/		Front Panel
Y Scale
Auto		Meas Setup/More(1 of 2)/Advanced/ More (1 of 2)/Data Packing/

Chapter 2 53