CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its side for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.
USB CONNECTOR (Series B)
When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal computer to this connector. (Refer to P12.)
RESET BUTTON
This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart the unit. Do not use RESET function excessively.
VIDEO INPUT JACKS
Connect the composite video output from video equipment to VIDEO/Y jack or connect the component video outputs to VIDEO/Y, Pb/Cb and Pr/Cr jacks. (Refer to P13.)
S-VIDEO INPUT JACK
Connect the
| VIDEO IN |
|
RESET | Y | |
COMPUTER |
|
|
AUDIO IN |
|
|
| CONTROL | |
AV AUDIO IN
CONTROL PORT CONNECTOR
When controlling the computer with Remote Control Unit of this projector, connect the mouse port of your personal computer to this connector. (Refer to P12.)
RGB INPUT
AUDIO OUT
RGB IN
TERMINAL (ANALOG)
Connect the computer output to this jack.
(Refer to P12.)
COMPUTER AUDIO
INPUT JACK
Connect the audio output (stereo) from computer to this jack. (Refer to P12.)
AUDIO OUTPUT JACK |
| AUDIO INPUT JACK |
Connect an external | Connect the audio output | |
audio amplifier to this | from video equipment to | |
jack. | this jack. | |
(Refer to P12, 13.) | (Refer to P13.) | |
11
