![](/images/new-backgrounds/1170890/17089059x1.webp)
VIDEO INPUT
SELECTING INPUT SOURCE
DIRECT OPERATION
Choose Video by pressing INPUT button on Top Control or on Remote Control Unit.
If projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below).
INPUT button
Video
Computer
|
| MENU OPERATION |
1 | Press MENU button and | |
| POINT LEFT/RIGHT button to move a red frame pointer to | |
| INPUT Menu icon. | |
2 | Press POINT DOWN button to move a red arrow pointer to | |
| Video and then press SET button. Source Select Menu will | |
| appear. | |
3 | Move a pointer to the source that you want to select and then | |
| press SET button. | |
|
| Projector automatically detects incoming Video signal, |
| Auto | |
|
| and adjusts itself to optimize its performance. |
|
|
•When both VIDEO jack and
•When both
Video | When video input signal is connected to VIDEO jack, |
| select Video. |
| |
| When video input signal is connected to |
| select |
|
Y,Pb/Cb,Pr/Cr When video input signal is connected to
INPUT MENU
Move a pointer to Video and press SET button.
VIDEO
Source Select Menu (VIDEO)
Move a pointer to the source and press SET button.
30