Canon LV-X2 owner manual Video Input

VIDEO INPUT

SELECTING THE INPUT SOURCE

DIRECT OPERATION

Choose Video by pressing the INPUT button on the Top Control or on the Remote Control Unit.

If the projector cannot reproduce a proper video source, select correct input source through the MENU OPERATION (see below).

INPUT button

Video

Computer

		MENU OPERATION
1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT button to move the red
	frame to the INPUT Menu icon.
2	Press the POINT DOWN button to move the red arrow to Video
	and then press the SET button. The Source Select Menu will
	appear.
3	Move the red arrow to the source that you want to select and
	then press the SET button.
		The projector automatically detects incoming the Video
	Auto
		signal, and adjusts itself to optimize its performance.

•When both VIDEO jack and S-VIDEO jack are connected, S-VIDEO jack has priority over VIDEO jack.

•When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO jack are connected, Y-Pb/Cb-Pr/Cr jacks have priority over S- VIDEO jack.

Video	When the video input signal is connected to VIDEO jack,
	select Video.
	When the video input signal is connected to S-VIDEO
S-Video
	jack, select S-Video.

Y,Pb/Cb,Pr/Cr When the video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

INPUT MENU

Move the red arrow to Video and press the SET button.

VIDEO

Source Select Menu (VIDEO)

Move the red arrow to the source and press the SET button.

30