PREPARATION
NOMENCHTOR
FRONT | INFRARED | SPEAKER |
| REMOTE RECEIVER |
|
| PROJECTION LENS |
|
FOCUS RING
ZOOM LEVER
LENS COVER
BACK
TOP CONTROLS
AND INDICATORS
| POWER CORD |
EXHAUST VENTS | CONNECTOR |
HOT AIR EXHAUSTED !
Air blown from Exhaust Vents is hot. When using or installing the projector, the following precautions should be taken.
●Do not put any flammable object near these vents.
●Keep front grills at least 3’(1m) away from any object, especially
●Do not touch this area, especially screws and metallic parts. This area becomes hot while the projector is used.
This projector detects internal temperature and automatically controls operating power of Cooling Fans.
TERMINALS
AND CONNECTORS
BOTTOM
✽AIR INTAKE VENTS 
AND AIR FILTERS
AIR INTAKE VENTS (Back and Bottom)
✽This projector is equipped with Cooling Fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover vent slots.
●Keep back and bottom clear of any object. Obstructions may block cooling air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
LAMP COVER
7
