ScanFront Setup Overview

Follow the procedures below to set up the ScanFront 220/220P.

1.Checking the Supplied Accessories (See p. 8)

Confirm that all of the supplied accessories are included.

2.Removing the Packing Materials and Attaching the Feed Roller (See p. 9)

Remove the packing materials protecting the scanner, and attach the supplied feed roller. (See p. 9.)

3.Installing the Scanner and Connecting to a Network (See p. 12)

Move the scanner to the desired installation site, and connect the AC adaptor and network cable.

4.Turning the Power ON and OFF (See p. 14)

Use the power switch to turn the scanner ON, and press [Power off] on the touch panel to turn it OFF.

5.Configuring the Scanner Settings (See p. 15)

To set up the scanner, configure the administrator settings on the scanner and the Web Menu settings from your computer’s Web browser. This guide describes how to configure the network settings from the scanner, how to set the date and time and confirm the time zone from the Web Menu, and how to configure mail server settings for sending e-mail.

For details on other settings, refer to the Operation Guide and ScanFront 220/220P INSTRUCTIONS (electronic manual).

*For a Web browser, use Microsoft Internet Explorer 6.0 or later.

•Network Settings

From the [Administrator setting] screen on the scanner, configure the [Device Name] and [IP Address] settings needed to connect to the network. (See p. 16.)

•Configuring the Date and Time and Confirming the Time Zone

Set the date and time and confirm the time zone by logging in to the Web Menu. (See p. 18.)

6.Scanning Procedure (See p. 21)

This section gives an overview of the procedure for scanning a document, using the example of scanning from the Home screen. For more details on this procedure, refer to the Operation Guide and ScanFront 220/220P INSTRUCTIONS (electronic manual).

7