Canon M11058, M11062 5. Configuring the Scanner Settings

5. Configuring the Scanner Settings

To set up the scanner, you must configure the [Network setting] items under [Administrator setting] on the scanner unit, and configure settings on the Web Menu (Administrator Mode).

This section describes the network settings configured under [Administrator setting] on the scanner (see p. 16), and date/time configuration and time zone confirmation in the Web Menu (Administrator Mode) (see p. 18), and mail server settings for sending images via e-mail (see p. 20).

For details on other settings, refer to the ScanFront 220/220P INSTRUCTIONS (electronic manual).

The following items are only a few of the availavle settings. The necessary configuration differs, depending on the scale of the network environment in which you plan to use the scanner. To use the scanner with the minimum required settings, you must register addresses to the Shared Address Book in addition to configuring the [Network setting] items.

Setting Item	Description	Administrator setting	Web Menu
			(Administrator Mode)
Network setting	Set the Device Name and IP Address.	Yes	No
Administrator password	Set the password required to login to	Yes	Yes
	[Administrator setting] and the Web Menu.
Login type	Select the screen that appears when users log in.	Yes	Yes
Register user	Register the users who will use the ScanFront.	No	Yes
Register Shared Address	Register entries in the Shared Address Book	No	Yes
Book	available to all users.
Register Shared Job Button	Register the Shared Job Button available to all	No	Yes
	users.
Device Configuration	Set the basic operations of the ScanFront	No	Yes
	(including network settings).
E-mail server settings	Register the SMTP server to be used for sending e-	No	Yes
	mail.
Authentication server settings	Register a domain server that can search users with	No	Yes
	Active Directory.
Address book server settings	Register an LDAP server that can search e-mail	No	Yes
	address books.

15