4. Turning the Power ON and OFF

Use the power switch to turn the scanner ON, and press the [Power off] button on the touch panel to turn it OFF.

❏Turning the Power ON

Press the power switch to turn the scanner ON. The power indicator lights, and the Home screen or the login screen appears.

Power switch

Home screen

Power indicator

IMPORTANT

•It takes approximately 40 seconds for the Home screen to appear after the power switch is turned on.

•If users have been registered, the login screen appears. (Refer to “Login screen” on p. 6-4 of the ScanFront 220/220P

INSTRUCTIONS.)

•When the power indicator is lit but nothing appears on the touch panel, Display Off has activated to turn the panel display off. You can touch the panel to restore the display. (Refer to “Display Off” on p. 4-25 of the ScanFront 220/220P

INSTRUCTIONS.)

•When the power indicator is flashing but nothing appears on the touch panel, the Low Power mode has activated to temporarily stop scanner operations. You can press the power switch to switch out of Low Power mode. (Refer to “Low Power Mode” on p.4-26 of the ScanFront 220/220P

INSTRUCTIONS.)

❏Turning the Power OFF

Press the [Power off] button displayed at the bottom left of the panel to turn the scanner OFF.

IMPORTANT

•When restarting the scanner, wait at least 5 seconds after turning the power OFF before turning it ON again.

•If the scanner stops responding, press and hold the power switch to shut down the system, and then press the power switch to turn the scanner ON again. In such cases, settings configured immediately before shutting down may be lost.

14