58

Sending a Fax to Multiple Destinations

(Sequential Broadcast)

You can send the same document to multiple recipients at once.
1
Place your documents (p.19).
2
Switch to the Fax mode (p.16).
3
Specify the destination.
4
Press [] or [] to select the desired method for specifying destinations.
<Address Book> Select a destination from the address book.
<Coded Dial> Enter the numbers registered in the coded dialing
codes.
<Specify Next
Destination (New)> Enter the destination with the alphanumeric keys.
Specify destination.
01/01/2012 12:52AM
0123456789
Address Book
Coded Dial
5
Specify the destination, and then press [OK].
6
Repeat steps 4-5 to enter additional destinations as needed.
<Specify Next Destination (New)> is available up to 10 destinations.
To con rm or delete destinations, press [] or [] to highlight
<Con rm/Edit Destination>, and then press [OK].
7
Press [ ] (Start).

Sending a Fax to an International Destination

(Adding Pauses)

When sending faxes to international destinations, it is sometimes di cult to connect to a
recipient, due to the long distance that the signal must travel. You can insert a pause after
the international access code to reduce this problem.
1
Place your documents (p.19).
2
Switch to the Fax mode (p.16).
3
Use the alphanumeric keys to enter the international access code.
For details about international access codes, contact your telephone service provider.
4
Press [ ] (Redial/Pause) to enter a pause.
The letter <P> is displayed to indicate the pause.
The default pause added before the number is two seconds. To change the pause
time, see “<Pause Time>” (p.67).
To add another pause, press [ ] (Redial/Pause) again.
5
Use the alphanumeric keys to enter the country code, area code, and fax
number.