When you install PageManager and OmniPage, follow the on- screen instructions.
13 | 14 | 15 | 16 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A
Connect the machine and your | You have now completed |
computer with a USB cable (A). | installation. |
For Network Connection (MF6580 Only)
Specify the IP Address Manually
NOTE
–This machine is set by default to automatically draw an IP address using DHCP. If your network server or router is configured to provide a DHCP address, all you need to do is connect a network cable and turn on the machine. The machine will draw an IP address automatically.
–This machine also supports automatic IP addresses using BOOTP and RARP protocols. For definitions and an explanation of each, please refer to the Advanced Guide.
1 Press [Additional Functions].
2 Use [ ] or [ ] to select <9. SYSTEM SETTINGS>, then press [OK].
3 Use [ ] or [ ] to select <2. NETWORK SETTINGS>, then press [OK].
4 Confirm that <1. TCP/IP SETTINGS> is displayed, then press [OK].
5 Confirm that <1. IP ADDRESS AUTO.> is displayed, then press [OK].
6 Use [ ] or [ ] to select <OFF>, then press [OK].
7 Confirm that <2. IP ADDRESS> is displayed, then press [OK].
8 Use the numeric keys to enter the IP address number, then press [OK].
Ex.
I P A D D R E S S
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
9 Confirm that <3. SUBNET MASK> is displayed, then press [OK].
10 Use the numeric keys to enter the subnet mask number, then press [OK].
Ex.
S U B N E T M A S K
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
17 | 18 |