4.Repeat steps above to assign another favourite channel.
5.If the LED flashes one long blink, the entry failed and must be repeated.
ADVANCED FUNCTIONS
Most users won’t need to perform any of the
Volume Control Settings
Volume control functions are defaulted to the TV that the remote is set to control. The volume control setting can be changed by following these instructions.
1.In CHILD or ADULT mode, hold down both MUTE and ON/OFF for three seconds, until the LED blinks twice.
2.Enter 9 9 3 and press VOL - to lock volume control to the Set Top Unit (STU).
Or
3.Enter 9 9 3 and press VOL+ to lock volume control to the TV.
Channel Control Settings
Volume control functions are defaulted to the STU. The channel control setting can be changed to be through the TV by following these instructions.
1.While in CHILD or ADULT mode, hold down both MUTE and ON/OFF for three seconds, until the LED blinks twice.
2.Enter 9 7 3 and press VOL+ to lock volume control to the TV
Or
3.Enter 9 7 3 and press VOL - to lock volume control to STU.
POWER CONTROL SETTINGS
The ON/OFF key has a default setting to control power on both the STU and TV each time it is pressed. Power control can be changed by following these steps:
1.In CHILD or ADULT mode, hold down both MUTE and ON/OFF for three seconds, until the LED blinks twice.
2.Enter 9 9 5
3.Press POWER
4.Press one of the following options:
•(0) to set ON/OFF to control STU and TV Power, STU first
•(1) to set ON/OFF to control TV and STU Power, TV first
•(2) to set ON/OFF to control STU power only
•(3) to set ON/OFF to control TV power only
5.Press and hold MUTE until the LED blinks two times.
10
