Canon MP150 specifications Unpack the machine, Connect the power cord, Install the FINE Cartridge

Models: MP150 MP170

1 2
Download 2 pages 21.51 Kb
Page 1
Image 1
1Unpack the machine.

Thank you for purchasing the Canon PIXMA MP170/MP150. To prepare your machine for use, please follow these Easy Setup Instructions before referring to any other documentation.

2Connect the power cord. IMPORTANT

Do not connect the USB cable until after the software is installed. See the reverse side of this sheet for details.

1Unpack the machine.

1Carefully remove all items from the box.

2Check the package contents.

• See the flapped lid of the packing box.

3Place the machine on a flat surface.

4Remove all shipping tape and the protective sheet.

5Open the Scanning Unit and remove the protective material (A).

(A)

Be sure to hold the machine by the side. Do not lift the machine by grasping the Paper Support Extension or the Operation Panel.

2Connect the power cord.

1Connect the power cord.

2 Press [ON/OFF] to turn ON the machine.

3Use [ 3 Install the FINE Cartridge. ] or [ 4Load the paper. ] on the Operation Panel to select the language on the LCD, then press [OK]. (MP170)

• The language setting is only available for some countries.

3 Install the FINE Cartridge.

2Prepare the FINE Cartridges.

Remove the protective tape.

Do not touch!

3Insert the FINE Cartridges.

4Close the Scanning Unit.

• Lift the Scanning Unit to put the Scanning Unit Support back to its original position.

The hardware setup is complete.IMPORTANT

Wait until the preparatory operation is complete; this takes about one to two minutes.

4Load the paper.

1Open the Paper Support (1) and pull up the Paper Support Extension (2) until it stops.

2Load the paper with the print side face up.

Ensure the paper stack does not exceed the Load Limit Mark (A).

3Pinch and adjust the Paper Guide (3) to the width of the stack.

4Open the Paper Output Tray.

(1)Manual backgroundManual background

(3)

1 Lift the Scanning Unit and pull the Scanning Unit Support down into place.

Manual background The cartridge Manual backgroundManual background moves to the left.

Install the FINE

Cartridges here.

Manual background (2)

(A)

Manual backgroundIMPORTANT (US only)

• Write down the serial number. You will need this to register the product.

The hardware setup is complete.

If you are connecting the machine to a computer for use, see the reverse side for instructions on installing the software.

© 2005 Canon Inc.

All products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice.

QT7-0006-V03

xx2005A

© CANON INC. 2005

PRINTED IN VIETNAM

Page 1
Image 1
Canon MP150, MP170 specifications Unpack the machine, Connect the power cord, Install the FINE Cartridge, Load the paper