Canon MP41DHII manual Rounding Switc h, Grand Total / Rate Set Switc h, Item Count Switc h

Rounding Switc h

R OUNDING
		:	or round-up [	] , round-off [5/4], or round-down [	] to
	5/4		the pre-selected decimal digits in the result.
Grand Total / Rate Set Switc h
GRAND TOTAL

GT

OFF ON RATE SET

RATE SET

OFF ON RATE SET

ormed with the GT switch set to "ON", the totals are accumulated in the grand total memory. Each time is pressed, the subtotal number is printed with the symbols GT+. When GT is pressed, the intermediate grand total is printed with the symbols G. Press GT successively to get the grand total followed by the symbols G.

witch to "RATE SET" for setting or recalling the TAX rate.

Item Count Switc h

–" position, the calculator count and print the number of calculation items up to 999.

< ITEM COUNTER >
	witch is set at "n+", the calculator counts the
number of times the		+ and	– keys are pressed.
witch is set at "n+/–, the calculator counts the number
of times the	+ key is pressed and subtracts from the total
numbers of times the – key is pressed.
< MEMOR Y ITEM COUNT >
	witch is set at "n+", the calculator counts
number of times		and	keys are pressed.
witch is set at "n+/–, the calculator counts the number
of times the	key is pressed and subtracts from the total
number of times the		key is pressed.

< PRINT OUT OF ITEM COUNT >

witch is turned "ON", and the "ITEM" switch is at the "n+" or "n+/–" position, the number of items recorded by the counter can print up to three digits on the left-hand side of

the paper by pressing either the			key or the key for item
count and	key or	key for memory item count.

2