Canon Canon Plain Paper Copier, NP6621 418, 3. Points to Note When Installing the Multifeeder Pick-Up Roller, 4. Removing the Separation Pad, 5. Removing the Multifeeder Spring Clutch

4–18
COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
3. Points to Note When Installing the
Multifeeder Pick-Up Roller
When installing the multifeeder pick-up roller q,
make sure that the side with a cross w on the collar
is toward the rear.
Figure 4-313
4. Removing the Separation Pad
1) Open the upper right door.
2) Remove the two screws q, and remove the
separation pad w.
Caution:
Take care so that the spring on the separation
pad assembly will not fly off.
Figure 4-314
5. Removing the Multifeeder Spring
Clutch
1) Remove the upper rear cover and the lower rear
cover.
2) Remove the three screws q, and shift the cord
guide w.
Figure 4-315
3) Remove the main motor. (See “Removing the
Main Motor.”)
4) Remove the three screws e, then, remove the
clutch stop plate y and the clutche u.
Figure 4-316
(front of copier
)
2
1
1
2
2
1
1
3
3
76