Canon Canon Plain Paper Copier, NP6621 437, 9. Installing the Lens Heater

4–37
COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
9. Installing the Lens Heater
1) Remove the copyboard glass and the lens
hood.
2) Remove the three screws, and disconnect the
two connectors; then, remove the original size
sensor q together with its mount.
Figure 4-414
3) Install the lens heater w with a screw e.
4) Connect the connector r.
Figure 4-415
43
2
5) Set the mirror heater harness t to the cord
guide.
Figure 4-416
6) Install the original size sensor mount, lens hood,
and copyboard glass.
5
1