Canon Canon Plain Paper Copier, NP6621 125, 11. Initializing User Mode

GENERAL DESCRIPTION
COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
1–25
11. Initializing User Mode
• The settings that were changed in the Additional
Functions mode can be restored to their initial
settings.
1) Press the
Aditional
Function
key.
• “U01” appears in the Copy quantity/Copy
ratio display.
• Once you set the Additional Functions mode,
the key turns red and copying operations
cannot be initiated.
2) Press the
0
key twice.
• If you make a mistake while entering a value,
press either the
0
key twice or press the
C
key
and then press the
0
key twice.
3) Press the OK key.
• “–1” is displayed in the Copy quantity/Copy
ratio display.
4) Press the
0
key.
• “–0” is displayed in the Copy quantity/Copy
ratio display.
• If you make a mistake while entering a value,
enter the correct value and it will replace the
incorrect one that was previously entered, or
press the
C
key and after the display clears,
enter the correct value.
5) Press the OK key.
• The Additional Functions are initialized and
“U00” is displayed.
Note:
If the key is pressed before the OK key is
pressed, the Additional Functions are not initial-
ized, and the copier will return to the normal
copying mode.