E
?The image cannot be erased.
•The memory card is full. Erase images ( 
110) or insert a new memory card.
•You have reached the maximum file number. Set the file numbering to RESET through the menu ( 
102) and insert a new memory card.
•You are using an unformatted memory card. Format the card ( 
122).
•The image is protected ( 
109).
•You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch.
Additional | Information |
Miscellaneous
Problem
?The wireless controller doesn’t work.
?The power indicator is flashing.
?The camcorder malfunctions.
?The DV cable is connected correctly, but there’s nothing in the display.
?The camcorder becomes warm during use.
Cause and/or what to do about it
•The remote sensor mode is set to OFFB in the menu ( 
46).
•The remote sensor modes of the wireless controller and the camcorder itself are different ( 
46).
•The batteries are dead or not inserted.
•Check the screen displays ( 
143).
•External interference may cause the camcorder’s microprocessor to malfunction temporarily. If random letters appear in the display or if normal operation is interrupted, remove and then replace the power source.
•Remove the cable and then reconnect it or turn the power off and back on again.
•This is not a malfunction.
