•When a new version of the P110 NMA software becomes available, you should perform software download to benefit from the extra capabilities provided. See the P110 NMA Installation Guide for details.
Rack Mounting
P110 switches slot into a standard
Remove the rubber feet from the base of any switch that is to be rack mounted. Place the switches in the rack, and then connect the P110 Exoplane, as follows:
1.Snap open the ends of the front panel to reveal the fixing holes.
2.Slot the switch into the rack. Insert the switches into the rack so that the switches in a logical stack lie directly on top of each other. Ensure that the P110 screw holes are aligned with the rack hole positions exactly as shown in Figure 3. Stacking them in this way will allow the switches to be easily connected using the P110 Exoplane cables.
3.Secure the switch in the rack using the screws. Use one screw on each side. Do not overtighten the screws to avoid damaging the plastic.
4.Connect the P110 Exoplane cables, as described above, and as illustrated in Figure 1.
5.Snap closed the hinged ends of the front panel.
8 | P114F Stackable Switch Installation Guide |
