Image is blurred or out of focus.

The camera moves when zConfirm the procedures in

the shutter button is “ appears” (p. 84). pressed.

AF-assist Beam is set to zIn dark places where it is difficult for

[Off].the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 21). Take care not to obstruct the AF-assist Beam with your hand when used.

Subject is out of focal range.zShoot with the subject at the correct focusing distance (p. 112).

The subject is hard to focus zUse the focus lock, AF lock or

on.

manual focus to shoot (p. 45).

Subject in recorded image is too dark.

Insufficient light for shooting.zSet the flash to (Flash on) (Basic Guide p. 12).

The subject is

zSet the exposure compensation to

underexposed because the

a positive (+) setting (p. 49).

surroundings are too bright. zUse the spot metering functions

 

(p. 48).

Subject is too far away for zShoot within correct flash range of

flash to reach.

the subject when using the built-in

 

flash (p. 113).

 

zRaise the ISO speed and then

 

shoot (p. 53).

Subject in recorded image is too bright, or image flashes white.

Subject is too close, making zShoot within correct flash range of

the flash too strong. the subject when using the built-in flash (p. 113).

zTurn [On] the Safety FE (p. 56).

86