142 Shooting / Replaying with a TV Monitor
A video-compatible television connected via the supplied AV cable AVC-DC100 can
be used to view images as you shoot or replay them.
1
Turn off the camera (p. 27, 29).
2
Attach AV Cable AVC-DC100 to the
terminal on the camera.
3
Plug the other ends of the AV cable to
the video in and audio in jacks on the TV.
4
Turn on the TV and switch it to Video mode.
5
Turn on the camera in Shooting mode or Replaying mode
(p. 27).
•The image will appear on the TV. Shoot or replay images as usual.
•If the images are not appearing on the TV when shooting, press the
button.
•No image will appear on the LCD monitor when the camera is connected to a TV
monitor.
•The video output signal can be switched (NTSC or PAL) to accommodate different
regional standards (p. 138). The default setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If an incorrect video system is set, the output image will not display properly.
•You can plug the AV cable into either the left or right input jack on the TV. Please
consult the TV’s manual for details.
•A TV monitor cannot be used in mode.
Shooting / Replaying with a TV Monitor
To the
Video In Jack
To the
Audio In Jack
Yellow
Plug
Black
Plug